1x10 Component Video-Audio Distribution Amplifier
$0.00
Product Overview:
1x10 Component Video-Audio Distribution Amplifier; K-1112
Key Features:
- Avoid locations with strong vibration, direct sunglight or intense heat.
- Avoid Electrical Shock:
- Do not handle power cord with wet hands, do not expose to rain or other moisture.
- If liquid is spilled on unit, unplug and have unit serviced at authorized services center.
- To reduce the risk of electrical shock, do not remove cover, no user-serviceable parts inside.
- Any TV used must have the same application as your Audio/Video Source. (Y, Cb, Cr and Y, Pb, Pr)
SKU: K-1112
Categories: A/V Distribution, Splitters
Audio
- Input Impedance: 47k ohms
- Output Impedance: 1k ohms
- THD: 0.05% @ 1.0 volt input level
- Frequency REsponse: 20 Hz to 100 kHz
- Channel Separation: >75dB @ 1 kHz
- In to Out Isolation: 60dB
- Out to In Isolation: 60dB
- Signal to Noise: 100dB @ 2 volts (out)
- A/V Input/Output Jacks: RCA type photo Jacks
- 2 Volt Unterminated
- 1 Volt terminated:75 ohms 5%
- Input Impedance: 75 ohms 5%
- Output Impedance: 75 ohms 5%
- Video Insertion loss: 50 Hz to 10 MHz < 1 dB limited In to Out Isolation: 50 Hz to 10 MHz 32db port to port Out to In Isolation: 50Hz to 10 MHz 60 dB Return loss: 50 Hz to 10 MHz 20dB Video Band Width: >40 MHz
- Requirements: 12 Volt DC @ 500mA with 2mm power jack