The 2GIG-FT1-345 is a wireless flood and temperature sensor for 2GIG control panels. The 2GIG-FT1-345 is the perfect sensor to alert the home owner of a flood or excessive change in temperature. The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature of a space for high and low temperature thresholds and report changes outside of the defined settings. The FT1-345 also has the ability to detect and report wet/dry flood condition in the event of the presence of standing water in the immediate sensor location. The FT1-345 sensor reports wet/dry conditions and temperature to the panel.
To protect against flood conditions, simply mount the 2GIG-FT1-345 sensor near a home's water heater or other contained water source and mount the sensor probe slightly above the floor. If a substantial leak occurs, the water will complete the circuit between the two probes on the sensor and a flood trouble or alarm will be sent to the panel. Once the 2GIG-FT1-345 sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty water, salt water or tap water.
Additionally, the 2GIG-FT1-345 will monitor the ambient temperature approximately once per minute. If the temperature exceeds 95°F or drops below 41°F,for five (5) minutes the sensor will send a temperature trouble to the 2GIG security panel.
SKU: 2GIG-FT1-345
Categories: Intrusion, Contacts & Sensors