The E+ Smoke/Heat/Freeze Detector – an exciting photoelectric smoke detection solution for dealers in search of the ultimate safety enhancement. Detecting both fixed temperature and rate-of-rise heat, it’s advanced One Go / All Go protocol seamlessly interconnects smoke detectors, ensuring that when one is triggered, all connected E+ Smoke Detectors will sound the alarm. This not only boosts overall safety but also creates a heightened sense of urgency during emergencies.
Key Features:
Extended range with up to 2KM* using 900MHz spectrum
SKU: 2GIG-SMKT-900
Categories: Contacts & Sensors
Transmitter Frequency 904MHz - 922MHz
Compatibility 2GIG EDGE Panel (FW 1.3 or later is required)
Supervisory Interval 70 minutes
Dimensions (D x H) 4.7 x 2.3 inches (120 x 58 mm)
Weight 0.46 lbs
Audible Alarm > 85dB (A) at 10ft (3m) minimum
High Temperature Level 134˚F +⁄- 4˚F
High Temperature Rate of Rise Above 104˚F and Increases 15˚F or more in one minute
Low-Temperature Warning At or below 40°F for up to 1 minute
Restore at 45°F for up to 1 minute
Ambient Temperature -40° to 100°F (4.4°C to 37.8°C)
Operating Rel. Humidity 15% to 95%, non-condensing
Batteries 2 x CR123A
Regulatory Listing UL268 7th Edition, CAN/ULC S529 7th Edition, CSFM