Karbon Connect K5710 70M (4K@60 4:4:4) HDR HDBaseT HDMI Extender

$0.00

Product Overview:

4K-HDR HDMI Extender over Single Cat.X with HDBaseT, RS-232, Bi-directional IR & PoC
The K5710 4K-HDR HDMI Extender over Single Cat.X with HDBaseT, RS-232, Bi-directional IR & PoC boosts up your video/audio transmission distance to 100m (330ft) in HDTV 1080p with 48-bit color depth and 70m (230ft) at 4K-HDR. K5710 has new generation technology which make sure the HDBaseT extender can support HDMI2.0a and HDCP2.2.

K5710 also supports the most advanced 3D video format complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the market. With only one cost- effective Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS4, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC monitors.

With the advanced design for the latest HDMI technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. K5710 is also equipped with bi-directional IR pass-through path and RS-232 serial port control. These bonus features allow users to boost RS-232 and IR control distance up to 100m (330ft) through only single Cat.5/5e/6 cable with HDMI signals. In addition, K5710 also supports PoC (Power over Cable) which can power both units from either TX or RX with power supply.

The K5710 includes two units: transmitting unit K5710-TX and receiving unit K5710-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. K5710 offers the most convenient solution for digital signage with long distance A/V transmission path.

Key Features:

  • Allows Reliable Remote Access of An HDMI Computer via a CAT.x Cable Up to 100 Meters ( 330 feet )
  • HDMI 2.0 Video Supports Most Popular Resolutions Up to 4K@60Hz ( 4:4:4 )
  • HDCP 2.2 and HDCP 1.4 Compliance Ensures Uninterrupted HD and UHD Video Playback
  • HDBaseT 1.0 Uncompressed Video Extension Ensures Crystal Clear Image and Low Latency
  • Bidirectional IR Extension Facilitates Remote Control of Sources or TVs
  • PoC ( Power over Cable ) Allows The Power Transmission from Either Tx-to-Rx or Rx-to-Tx
(25 products available)
Quantity

SKU: K5710

Categories: A/V Distribution, Extenders & Baluns, Clearance

Specifications:
  • HDMI 2.0a compliant
  • Supports 4K2K@60 4:4:4 8bits
  • Supports HDR*, which is 4K2K@60 4:2:0 10bits**
  • Extends HDMI signal up to 100m (330ft) from the HDMI source at Full HD 1080p 48-bit, 70m (230ft) at 4K2K@60 444 (4K-HDR Technology)
  • Supports PoC(Power over Cable) which can power both units from TX or RX side with power supply
  • Supports EDID adjustment mechanism for HDMI2.0 at pixel clock higher than 340 MHz
  • HDCP & EDID Bypass
  • CEC support
  • Auto equalization
  • Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
  • DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
  • Supports full frequency IR signal from 20KHz to 60KHz
  • Bi-directional IR path-through
  • Full Duplex RS-232 control up to 115,200 bps through connector
  • Wall mounting housing design for easy and robust installation

0.00

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Submit Your Review

Please login to write review!

Upload photos
You can upload up to 6 photos, each photo maximum size is 2048 kilobytes

Related products