AMP-4-125 - 4 Channel 125W 8Ω, 2 Channel 70/100V 250W DSP Matrix Amplifier
$0.00
The AMP-4-125 power amplifier delivers configurable and reliable high performance audio power amplification for commercial and hospitality applications that demand a mix of low impedance and high impedance outputs. With a compact 1U half-rack design, this DSP-enabled Class-D amplifier can drive low impedance 4Ω to 16Ω loudspeakers as well as high impedance 70V/100V transformer-coupled loudspeakers. The AMP-4-125 can accept four analog inputs and one stereo S/PDIF digital input, and delivers either two low impedance stereo outputs, or two 70V/100V mono outputs.
For set-up, the RTI web GUI enables effortless browser-based configuration of the installed system. Its DSP configuration options include multizone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, sine wave generator, and more.
Included in the box:
AMP-4-125, power cord, 6-pin Phoenix input connectors (2), 4-pin Phoenix output connectors (2), 8-pin Phoenix GPIO socket connector (1), adhesive rubber feet (4)
SKU: AMP-4-125
Categories: Sound System, PA System
- Four analog audio source input channels (balanced or unbalanced) and one digital input (S/PDIF).
- Two Lo-Z stereo or four Lo-Z mono output zones, two Hi-Z mono output zones, or a mix of them.
- Class D amplifier provides a robust and clear audio experience with 125 Watts @ 4Ω/ 8Ω per channel or 250W @ 70V/100V per channel.
- Daisy-chain multiple amplifiers and expand the number of zones by by distributing up to two audio inputs or zones.
- Built-in DSP allows for fine-tuning acoustic characteristics for each zone.
- Easy configuration via LAN or WiFi.
- IP and GPIO control options.
- Free-standing installation or rack-mount (rack-mount kit included).