Beale Street 1000W 2 Channel Amplifier BAV2500

Brand: Beale Street

$0.00

Product Overview:

The BAV2500 and BAV4250 amplifiers can be configured for 4/8 ohm zones, it can also be configured 70/100V or can be configured for any combination of 4/8 ohm and 70/100V zones all at the same time! Have one zone delivering 8 ohm, while a separate zone delivering 70V, simultaneously. That’s some stuff, right? But there’s more...each zone can be controlled by the sleek front panel or over TCP/IP for ON/OFF, Input, Volume/Mute, Treble/Bass and Left/Right Balance. Once connected to a network, the browser-based GUI allows for full control, monitoring, and DSP to adjust nearly any aspect of the audio being output. The BAV2500 amplifier is a two-channel digital professional audio amplifier which can be set to 4/8 ohm, 70V or 100V outputs and provides up to 500W per channel. There are 2 inputs which are balanced (3-conductor connector) or unbalanced (RCA) which can be matrixed and sent to the 2 outputs. The BAV4250 amplifier is a four-channel digital professional audio amplifier which can be set to 4/8 ohm, 70V or 100V outputs and provides up to 250W per channel. There are 4 inputs which are balanced (3-conductor connector) or unbalanced (RCA) which can be matrixed and sent to the 4 outputs. Finally, the BAV2500 and BAV4250 has a 100~240 VAC allowing it to be used just about anywhere there is AC Voltage. And of course, it’s rack mountable and comes with removable rack ears. The Beale Street BAV2500 and BAV4250 is ready for anything...anywhere.

Key Features:

  • 500W per channel output
  • 2 balanced and unbalanced analog audio inputs
  • 2 output channels
  • Compatible with 4/8 ohm and 70/100V speakers and systems
  • Controllable via front panel and IP
  • Browser based GUI for easy setup and control
  • Matrix mode allowing any source to be routed to any output channel
  • Any source(s) can be mixed or individually selected to any output channel
  • Digital Signal Processing (DSP) to completely customize audio performance and experience
  • Parametric Equalizer to adjust bass, treble, notch, LPF and HPF
  • Rack Mountable with accessories included
  • CE, FCC, ICES-3 Ratings
  • High efficiency, low noise universal power supply (100~240VAC, 50/60Hz)
(3 products available)
Quantity

SKU: BAV2500

Categories: Amplifiers & Receivers, Amplifiers

Specifications:

  • Description BAV2500 BAV4250
  • Amplifier Channel 2 Channel 4 Channel
  • Power Output 500W rms x2 @4 Ohm/70V/100V 250W rms x 4 @4 Ohm/70V/100V
  • Signal-to-Noise Ratio 90dB @1KHz/rated power into 70V mode
  • THD+N <1% @1KHz/rated power
  • Frequency Response 20Hz to 20KHz +/-0.3dB @8 Ohms
  • Crosstalk >70dB @1KHz
  • Amplifier gain Selectable
  • Analog Input - Sensitivity Selectable, 0dB or +6dB
  • Analog Input - Impedance 22K ohms
  • Analog Input - Type
  • Balanced terminal block/Unbalanced RCA x 2; RCA x 4
  • Output 2-Pin Terminal Green x 2 2-Pin Terminal Green x 4
  • Indicators (LEDs) Signal, Limit, Protection
  • Power AMP High Efficiency Digital Amplifier
  • DSP 28-/56-bit, 50 MIPS; HPF; 3 PEQs per channel; 2x2 input matrix mixer 4x4 input matrix mixer; Limiter
  • Control Interface 10/100M Ethernet
  • AC Input Universal, 100~240V AC, 50/60Hz
  • Power Supply Topology SMPS W/PFC
  • Protections Over-power, Over-current, Over-temperature, Soft-start protections
  • Display LCD
  • Fuse Rating on Back Panel T10AH/250V
  • Dimensions 16.93” W x 2.17” H x 12.6” D 16.93” W x 2.17” H x 12.6” D
  • Weight 12.57 lbs 13.67 lbs

0.00

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Submit Your Review

Please login to write review!

Upload photos
You can upload up to 6 photos, each photo maximum size is 2048 kilobytes

Related products