Crown Audio DCi 2|1250 2 Channel, 1250W @ 4Ω Analog Power Amplifier, 70V/100V DCI2X1250N-U-USFX

Brand: Crown

$0.00

Product Overview: 

The DriveCore™ Install series amplifiers is a complete line of high-performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered, and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st-century installed sound applications. Versatile, compact, and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
 

Key Features:

  • TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.
  • DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 
  • CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.
  • BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.
  • REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.
  • EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.
  • ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.
(Available)
Quantity

SKU: DCI2X1250N-U-USFX

Categories: Amplifiers

Performance Specifications 2|300 4|300 8|300 2|600 4|600 8|600 2|1250 4|1250
Frequency Response
(8Ω, 20Hz - 20kHz) ±0.25dB
Signal to Noise Ratio
(A-weighted) >108dB
Total Harmonic Distortion (at
full rated power, 20Hz - 20kHz) 0.35%
Voltage Gain 34dB
Damping Factor
(20Hz to 100Hz) >1000 >1000 >1000 >1000 >1000 >1000 >1500 >1500
Input Impedance (nominal
balanced, unbalanced) 10kΩ, 5kΩ
Maximum Input Level
before Compression +20dBu
Maximum Input Level
Before Clipping +26dBu
Load Impedance
Stereo/Dual Mode 2Ω - 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise
(re dBA SPL @ 1M) 45 45 47 45 45 47 45 47
Required AC Mains (±10%) 100Vrms - 240Vrms ~50/60Hz
IEC Power Connector 15A IEC 15A IEC 15A IEC 15A IEC 15A IEC 20A IEC 15A IEC 20A IEC
Physical Specifications
Width 19 in. (48.3 cm)
Height 3.5 in. (8.9 cm)
Depth 14.25 in. ( 35.63 cm) DCi 8|600 & 4|1250: 17 in. (42.5 cm)
Weight
DCi 2|300 & 2|600: 18.8lbs (8.53kg);
DCi 4|300 & 4|600: 20.1lbs (9.12kg);
DCi 8|300 & 2|1250: 23.5lbs (10.66kg);
DCi 8|600 & 4|1250: 30lbs (13.60kg
 

0.00

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Submit Your Review

Please login to write review!

Upload photos
You can upload up to 6 photos, each photo maximum size is 2048 kilobytes

Related products