DSC Power Supply Adapter 9VADAPTER-US

PRODUCT OVERVIEW:

The plug-in device will provide reliable and consistent power for these keypads so that they stay running when needed.

You do not need a screwdriver to connect the DSC 9VADAPTER-US with a compatible keypad. Just connect the barrel connector with the keypad, and plug the transformer into a wall outlet. The transformer comes with a screw and a red nylon washer, which allow you to secure it into the bottom plug of an outlet. Remove the outlet cover screw, and replace it with the screw provided with the DSC OVADAPTER-US.

You can easily remove the screw by spinning off the red washer and then removing the screw. Or you can keep the screw and use it to secure the power supply to your wall outlet so that the transformer is more difficult to unplug accidentally. However, using the screw will require a screwdriver, usually a Phillips-head. Whether you use the securing screw, or not, is up to you. Once you have the DSC 9VADAPTER-US, your DSC Keypad will stay powered on reliably.

KEY FEATURES:

• Input: Plug-in 100-240 VAC 50/60HZ
• Output: +9VDC 1.25A
• For Use With WTK5504 Wireless Touchscreen Keypad and The HS2LCDWF Power Series Neo Wireless
• Full Message LCD Powerg 2-Way Wire-Free Keypad