Integra’s superior low-impedance stereo amplification and raft of integration features for dual-zone audio is now easier than ever to enjoy thanks to new streaming technologies supported over 5 GHz / 2.4 GHz Wi-Fi®, including Chromecast built-in, DTS Play-Fi®, AirPlay, and FlareConnect™ wireless multi-room audio distribution.
Hand Selected Parts Tuned for Audio
To ensure low-impedance high-current performance, the DTM-6 employs fully discrete output stage circuitry, and massive high-current capacitors. 135 watts channel( 6OHm, 1Kh, 1% THD, 1 Channel Driver, IEC) are packed into an anti-vibration oval chassis with an with anti-resonant front panel, and the non-phase --shift amp design produces stunningly realistic sound imaging
Once the receiver is connected to Sonos Connect, any music or source can be sent from the Sono app to the receiver. The receiver can be grouped
SKU: DTM6
Categories: A/V Distribution
Power Output (6 Ω, 1 kHz, 1% THD, 1 Channel Driven, IEC) Power Output (6 Ω, 1 kHz, 10% THD, 1 Channel Driven, JEITA) | 135 W / Channel (6 Ω) 140 W / Channel (6 Ω) |
Dynamic Power | 180 W / Channel (3 Ω) 160 W / Channel (4 Ω) 100 W / Channel (8 Ω) |
THD (Total Harmonic Distortion + Noise) | 0.08% (20 Hz-20 kHz, Half Power) |
Input Sensitivity and Impedance | 200 mV / 50 k-Ω (LINE) 2.5 mV / 50 k-Ω (Phono MM) |
Rated RCA Output Level and Impedance | 150 mV / 470 Ω (Pre Out) 470 mV / 680 Ω (Subwoofer Pre Out) 200 mV / 2.2 k-Ω (Zone Line Out) 150 mV / 2.2 k-Ω (Zone Pre Out) |
Phono Overload | 70 mV (MM 1 kHz, 0.5%) |
Frequency Response | 10 Hz – 100 kHz / +1 dB-3 dB (Direct Mode) |
Tone Control | ±10dB, 100 Hz (Bass) ±10dB, 10 kHz (Treble) |
Signal-to-Noise Ratio | 106 dB (IHF-A, Line, SP Out) 80 dB (IHF-A, Phono In, SP Out) |
Speaker Impedance | 4 Ω – 16 Ω |
Headphone Output Impedance | 390 Ω |
Headphone Rated Output | 200 mW (32 Ω 1 kHz 10 % THD) |