Elan Multi Zone Audio Extender EL-IPD-AMP-EXT
$0.00
Product Overview:
The EL-IPD-AMP-EXT Multi-Zone Audio Extender complements the ELAN IP amplifier and preamps to add up to 8 zones of audio over existing networks using Dante™.
The EL-IPD-AMP-EXT is used in conjunction with an amplifier or preamp in the ELAN family of IP-enabled amps to add up to 8 zones of audio.
Configure speaker outputs as left, right, or mono with single or multiple speakers connected to each. Four line-level audio outputs can be configured as left, right, mono, or subwoofer out.
Each output or combination of outputs can be configured as separate zones with EQ and lip-sync delay applied to any zone individually.
ELAN IP-enabled audio distribution simplifies whole-house audio distribution and enhances the intelligent home by delivering high-quality audio over the existing network. Easily scaling from a single chassis solution to a decentralized multi-chassis / multi-source implementation, ELAN IP audio distribution meets the needs for projects of up to 64 individual zones.
Key Features:
- 8 speaker channels
- 4 preamp outputs configurable as left, right, mono, or sub out
- Individual lip sync delay for each zone
- 5-band equalizer for each zone
SKU: EL-IPD-AMP-EXT
Categories: A/V Distribution, Extenders & Baluns
- 2 Stereo / 4 Mono Analog RCA Pre-amp Outputs
- Configurable to Left, Right, Mono, or Sub-woofer
- Fixed or variable line level output
- Fixed: 0dB nominal gain
- Variable: -50 to +0dB at 0.5dB per step
- Unbalanced
- Output impedance: 470 Ω
- 4 Stereo / 8 Mono Amplifier Outputs
- Configurable to Left, Right, or Mono
- Output Power: 80W at 8Ω
- 100W at 4Ω
- THD: < 0.05% @ 1kHz
- Frequency Response: 20Hz to 20kHz, +.5dB/-.5dB
- Crosstalk: >60dB @ 1kHz/1W
- Signal to Noise: >100dB
- Lip Sync Delay: Individual Lip Sync Delay for each Speaker and Preamp Zone
- Delay Time: 0 – 400ms
- Adjustable: 10ms increments
- Individual Tone Control for Each Speaker and Preamp Zone
- Five-band equalizer
- Loudness on/off
- High/Low pass
- Adjustable Crossover Points
- 3.5mm Mono
- Zone Trigger / System Trigger Outputs
- Pinout: Tip = signal, Sleeve = ground
- Output: +12Vdc, 100mA current limit
- 1 RJ45 Jack 100/1000 Ethernet DHCP Enabled by Default
- AC 100-120 / 220-240 V~ 50/60Hz, 1000W
- Operating Temperature: +5° C – +45° C (+41°F – +113°F)
- Operating Humidity: 0 – 90% non-condensing Storage Temperature: 0° C – +60° C (32°F – +140°F)
- 17D X 17W X 4H in. / 431.8D X 431.8W X 101.6H mm (with feet)
- 17D X 17W X 3.5 in. / 431.8D X 431.8W X 88.9H mm (without feet)
- Weight: 21.35 lbs / 9.68 Kg