The EL-NVR-2TB is a 1U rack mountable NVR enabled with ELAN Discovery and specifically designed to complement any ELAN home automation project including surveillance. Native record and playback, either timeline-based or event-based, from the NVR using any ELAN UI provides an experience second to none. The HDMI output also allows for on-screen display (OSD) with simultaneous playback of multiple cameras. Expandable storage up to 16TB and 480fps of video input, 16 channels at 30fps or 8 channels at 60fps make ELAN NVRs a fit for any size project.
It is important to remember when installing additional Hard Disk Drives (HDD) to the NVR, the only supported HDD model is the WD Purple Series. We strongly recommend that all connected HDDs should be of the same capacity. For example, if you have one 4TB HDD connected and wish to add another HDD, you should only add a 4TB WD Purple Series HDD. Using any other brand or model HDD or mixing and matching HDD capacities could negatively affect the performance of the ELAN NVR. Following these recommendations will guarantee the best performance for both you and your customer.
All ELAN Surveillance products are embedded with the ELAN beacon, making them the fastest and easiest surveillance products to install in an ELAN system. Just connect the NVR and cameras to the network and ELAN Discovery takes it from there. Its Auto-Discover and Auto-Configure feature scans your network, including wireless connections, allowing you to provision and install devices with just a click. We’ve eliminated the need to individually log into each device for setup, saving you substantial time.
SKU: EL-NVR-2TB
Categories: Video Surveillance, NVR's