Karbon Connect K5701 40M (4K@30Hz) HDBaseT-Lite HDMI Extender

$0.00

Product Overview:

The K5701 Enhanced HDMI Extender over Single Cat.X with HDBaseT-Lite, RS-232, Bi-directional IR & PoC boosts up your video/audio transmission distance to 60m (198ft) in HDTV 1080p with 48-bit color depth. The new generation enhanced technology is to make sure the HDBaseT extender can work properly even though source and display are both compliant with HDMI2.0a and HDCP2.2. K5701 also supports the most advanced 3D video format complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the market. With only one cost- effective Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS4, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. With the advanced design for the latest HDMI technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. K5701 is also equipped with bi-directional IR pass-through path and RS-232 serial port control. These bonus features allow users to boost RS-232 and IR control distance up to 60m (198ft) through only single Cat.5/5e/6 cable with HDMI signals. In addition, K5701 also supports PoC (Power over Cable) which can power both units from either TX or RX with power supply. The K5701 includes two units: transmitting unit K5701-TX and receiving unit K5701-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. K5701 offers the most convenient solution for digital signage with long distance A/V transmission path. With 10G transmission width, K5701 is ready for your next HDMI generation and applications!

Key Features:

● Supports HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT technology)
● Extends the transmission up to 60m (198ft) from the HDMI source at Full HD 1080p 48-bit and 40m (130ft) at 4K2K@30
● Supports PoC(Power over Cable) which can power both units from TX or RX side with power supply
● Supports EDID adjustment mechanism for HDMI2.0 at pixel clock higher than 340 MHz
● HDCP & EDID Bypass
● CEC support
● Auto equalization
● Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
● DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
● Supports full frequency IR signal from 20KHz to 60KHz
● Bi-directional IR path-through
● Full Duplex RS-232 control up to 115,200 bps through connector
● Wall mounting housing design for easy and robust installation

(252 products available)
Quantity

SKU: K5701

Categories: A/V Distribution, Extenders & Baluns, Clearance

Technical K5701[Tx] K5701[Rx]
  • Role of usage Transmitter [TX] Receiver [RX]
  • HDMI compliance HDMI Deep Color, full 3D & 4K2K@30
  • HDCP compliance Yes
  • Video bandwidth Single-link 340MHz [10.2Gbps]
  • Video support 480i / 480p / 720p / 1080i / 1080p60
  • HDMI over UTP 1080p@60 60m (198ft) [CAT5e]
  • Audio support Surround sound [up to 7.1ch) or stereo digital audio
  • Equalization Auto
  • Input TMDS signal 1.2 Volts [peak-to-peak]
  • Input DDC signal 5 Volts [peak-to-peak, TTL]
  • ESD protection [1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge] [2] Core chipset — ±8kV
  • PCB stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω]
  • IR pass-thru Bi-directional
  • RS-232 support Yes
  • PoC support Yes
  • Input 1x HDMI 1x 3.5mm 1x RJ-45 1x 3.5mm
  • Output 1x RJ-45 1x 3.5mm 1x HDMI 1x 3.5mm
  • In / Out 1x RS-232 1x RS-232
  • HDMI source control Controllable via IR pass-through from RX to TX with IR extenders
  • HDMI connector Type A [19-pin female]
  • Min DIN connector DIN-9
  • RJ-45 connector WE/SS 8P8C(Reverse Mode)
  • Rotary control switch None
  • 3.5mm connector IR receiver / IR blaster IR receiver / IR blaster
Mechanical K5701[Tx] K5701[Rx]
  • Housing Metal enclosure
  • Dimensions [L x W x H] Model 98.5 x 73.4 x 14.3mm [3.9" x 2.9" x 0.6"]; Package 128 x 175 x 134mm [5" x 6.9" x 5.3"]; Carton 647 x 366 x 290mm [1'6" x 1'3" x 11.8"];
  • Weight; Model 160g [5.6 oz] 160g [5.6 oz]; Package 720g [1.6 lbs]
  • Fixedness Wall-mounting case with screws
  • Power supply 12V 1.5A DC
  • Power consumption 3 Watt [max] 7 Watt [max]
  • Operation temperature 0~40°C [32~104°F]
  • Storage temperature -20~60°C [-4~140°F]
  • Relative humidity 20~90% RH [no condensation]

0.00

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Submit Your Review

Please login to write review!

Upload photos
You can upload up to 6 photos, each photo maximum size is 2048 kilobytes

Related products