Hall Technologies HDMI Video Extender HBX-R
$0.00
Product Overview:
This product is a Class A HDBaseT compliant Receiver that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.
Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.
Receiver includes a universal 5v power supply. IR emitter and IR detector cables are included.
Key Features:
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
- Plug and play, no configuration needed
- Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs
SKU: HBX-R
Categories: A/V Distribution, Extenders & Baluns
- Standards DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
- Signal Type TMDS
- Resolutions DVI signal - VGA (640x480) thru WUXGA (1920x1200)
- HDTV signal - 480i through 1080p
- Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60 m
- Formats All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192 kHz sample rate)
- DDC Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
- CEC Pass-Thru CEC for Consumer Electronics Control compatible devices
- RS232 Bidirectional (full-duplex) any baud rate up to 115,200
- Ethernet 100BaseT Ethernet LAN
- IR Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz
- Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
- Power Sender & Receiver: 10 watts maximum
- Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
- Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
- Cooling Convection
- Mounting End plates with hole for surface mounting
- Enclosure type Metal (Aluminum ends, Aluminum Extrusion)
- Dimensions 1.0" H x 3.9" W x 3.9" D (25mm H x 100mm W x 100mm D)
- Depth excludes connectors
- Product weight Sender 9.3 oz (0.58 lb or 264 g)
- Receiver 10 oz (0.63 lb or 284 g)
- Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging
- Safety CE
- EMI/EMC CE, FCC Class A
- MTBF 90,000 hours (Calculated Estimate)
- Warranty 3 years parts and labor