Hall Technologies USB 2.0 over UTP Extender U22-160
$0.00
Product Overview:
U22-160 USB 2.0 over UTP Extender with 2-Port Hub
The U22-160 extends your host PC’s USB 2.0 port across a single Cat5e/6 cable to 50 meters (165 ft) with data rates up to 480 Mb/s.
In most instances, no power supply is needed for either side as the local (host) side gets its power from the PC and it sends PoC (Power-over-Cable) to the remote (device) side. However for convenience a power supply is included that can be plugged in to the remote end for power hungry USB devices. The remote end has a two port hub built-in to allow connection of 2 USB Devices. The U22-160 is a perfect solution for industrial and commercial applications.
This product can be used to extend a broad range of USB devices like webcams, printers, keyboards, and disk drives up to 165 ft (50 m) using single Cat 5/6 cable.
Key Features:
- Extends USB 2.0 devices up to 165 ft (50 m) using Cat5
- Supports high-speed, full-speed, and or low-speed devices
- Status LEDs indicate Power and Data
- Supports Hot Plug/Unplug
- Can power most USB devices without power supply
- Plug and Play installation
SKU: U22-160
Categories: Networking, Accessories
- Bus Interface USB 2.0
- Number of Ports 2 (on the Remote Unit)
- Local unit 1 x USB type B female
- 1 x RJ45 Ethernet female
- 1 x DC Power supply
- Remote Unit 2 x USB type A female
- 1 x RJ45 Ethernet female
- 1 x DC Power supply
- LEDs 1 x Power, 1 x Data
- Max Data Rate 480 Mbps
- Max Cable Distance 50m (165 ft)
- Cable Type Cat 5e/6/6a
- Power Supply 5V DC 2A
- Operating Temperature 32 to 122 °F (0 to 50 °C)
- Operating Humidity 20% - 80% RH
- Dimensions Ends: 2.5 x 1.3 x 0.9 inch (65 x 35 x 25 mm)
- Shipping: 9.5 x 8 x 3 inch (24 x 20 x 8 cm)
- Weight Shipping: 1 lbs (450g)