Intuitive IWB-1 SERIES ENCLOSURES - Black IWB-1 XB

Product Overview:

The perfect solution for mounting all of your components behind the display. With multiple punch-out’s for conduit, power boxes, wall plates, or direct wiring, this enclosure is the installers best friend. With the ability to be installed retrofit or pre-construction, and UL approval, it can be installed in almost any situation. Each side of the enclosure features easy to remove punch-out’s. One long side, and one short side have a punchout for an high volt electric box.  Using metal power boxes, simply remove the first punchout. For plastic power boxes, easily remove the second section. With our enclosures you can use METAL or PLASTIC power boxes. The enclosures feature a removable trim ring, so they can be mounted Pre-Construction or retrofit…no pre-construction kit needed. The enclosures will allow for 3/4″ drywall, great for jobs with 5/8″ drywall and a heavy finish. The removable trim ring, coupled with our mounting slots, allow you to adjust the enclosure in and out for the perfect fit.

The dog ears install from the inside and don’t fall into the wall cavity. They are incredibly strong and can support the enclosure by themselves, or add additional support when stud mounted. Plastic enclosures have a thick edge, this keeps the TV mount from sitting on the wall. The steel edge is only 1.5mm (0.06″), yet it is extremely strong. The “IWB-1” series of enclosures feature 2 mounting slots on each side, used to mount the enclosure during pre-construction.  After wallboard installation, loosen the screws and easily slide the enclosure so that it is flush with the surface. New grommet allows you to run wires directly into the enclosure. It installs easily into either of the two 1.9″ conduit openings and gives you a 1.7″ protected diameter hole. One is included with each enclosure.

Key Features:

• Our IWB “s” and “b” series of enclosures are very easy to install and incredibly flexible in design.  With the ability to used in Pre-Construction or retrofit installations, they will fit into any installation.
• Simplify your installation and make them more profitable at the same time.
• Available in Black or White, solid back or breadboard back.
• Our enclosures feature a removable trim ring, so they can be mounted Pre-Construction or retrofit…no pre-construction kit needed.
• Our boxes have the ability to use either metal or plastic electrical back boxes.  Now you can use the power box that you like most.
• Our wall plate punch-outs are perfect for all of your A/V connections.
• Directly mount wall plates to the side of the enclosure and keep your installation clutter free.
• Our enclosures feature the ability to fit over 3/4″ wallboard, great for jobs with 5/8″ wallboard and a heavy finish.
• Our removable trim ring has the ability to adjust up and down, this is great for getting the perfect fit.
• Multiple racetrack shaped punch-outs allow you to easily pull your wires into the enclosure.  Our grommet protects the wires and keeps them in place.
• Our Dog ears install from the inside and don’t fall into the wall cavity.  They are incredibly strong and can support the enclosure by themselves, or add additional support when stud mounted.