Intuitive IWB-2 SERIES ENCLOSURES - Black IWB-2 XB

Product Overview:

Intuitive IWB-2 SERIES ENCLOSURES - Black IWB-2 XB

The perfect solution for mounting all of your components behind the display. With multiple punch-out’s for conduit, power boxes, wall plates, or direct wiring, this enclosure is the installers best friend. With the ability to be installed retrofit or pre-construction, and UL approval, it can be installed in almost any situation. Each side of the enclosure features easy to remove punch-out’s. One long side, and one short side have a punchout for an high volt electric box.  Using metal power boxes, simply remove the first punchout.  For plastic power boxes, easily remove the second section. With our enclosures you can use METAL or PLASTIC power boxes. The enclosures feature a removable trim ring, so they can be mounted Pre-Construction or retrofit…no pre-construction kit needed. The enclosures will allow for 3/4″ drywall, great for jobs with 5/8″ drywall and a heavy finish. The removable trim ring, coupled with our mounting slots, allow you to adjust the enclosure in and out for the perfect fit.

The doge ears install from the inside and don’t fall into the wall cavity. They are incredibly strong and can support the enclosure by themselves, or add additional support when stud mounted. Plastic enclosures have a thick edge, this keeps the TV mount from sitting on the wall. The steel edge is only 1.5mm (0.06″), yet it is extremely strong. The “IWB-2” series of enclosures feature 2 mounting slots on each side, used to mount the enclosure during pre-construction.  After wallboard installation, loosen the screws and easily slide the enclosure so that it is flush with the surface. New grommet allows you to run wires directly into the enclosure. It installs easily into either of the two 1.9″ conduit openings and gives you a 1.7″ protected diameter hole. One is included with each enclosure.

Key Features:

• The perfect solution for mounting all of your components is here! With multiple punch-outs for conduit power, power boxes, wall plates, or direct wiring, this enclosure is an installer’s best friend. With the ability to be installed retrofit or pre-construction, and UL approval, this In-Wall Box is equipped for nearly any situation.
• Each side of the enclosure features easy to remove punch-outs. One long side and one short side have a punch-out for high electric volt boxes. Using metal power boxes? Simply remove the first punch-out. For plastic power boxes, easily remove the second section.
• The sides that do not have a punch out for high electric volt boxes feature punch-outs for direct mounting of wall plates. Also, there are punch-outs for ¾ in, 1 in, 1.25 in, & 1.5 in conduits!
• Each enclosure features a removable trim ring, so they can be mounted Pre-Construction or retrofit-no pre-construction kit needed.
• Intuitive’s Large In-Wall Box will allow for ¾ in drywall, great for jobs with 5/8 in drywall and a heavy finish. Complete with a removable trim ring and coupled with mounting slots, this Box allows you to adjust the enclosure in and out for the perfect fit.
• This Wall Box is constructed with dog ears that install from the inside and don’t fall into the wall cavity. They are incredibly strong and can support the enclosure by themselves, or add additional support when stud mounted.
• Plastic enclosures have a thick edge that keeps the TV mount from sitting on the wall. This In-Wall Box has a sleeker design. At only 4.5 mm, its edge is thin but extremely strong.
• Built with a perfect design, this series of enclosures features 2 mounting slots on each side to mount the box during pre-construction. After wallboard installation, loosen the screws and easily slide the enclosure so it’s flush with the surface.