JBL HIGH-POWER J-SHAPED LINE ARR COLUMN CBT 70J-1-WH
$0.00
Product Overview:
Constant Beamwidth Technology™ Two-Way Line Array Column with Asymmetrical Vertical Coverage. With improved mounting bracket for enhanced aiming flexibility and stronger grille.
The CBT 70J-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers. (shown with included grille removed)
Key Features:
- Sends more sound towards the far area of the room to make front-to-back sound levels more consistent
- Patented Constant Beamwidth Technology TM
- Provides constant directivity up to the highest frequencies and reduces coverage lobing
- Switchable Vertical Pattern Coverage
- Switchable Between 45C for medium -throw coverage and 25 for long-throw applications
SKU: CBT 70J-1-WH
Categories: Sound System, Array Speakers
Specifications
- Components
- Four 130 mm (5 in) LF drivers ; Sixteen 25 mm (1 in) HF drivers
- Frequency Range (-10 dB)
- 60 Hz – 20 kHz
- Vertical Coverage (Vertical Narrow Mode)
- 25° (2 kHz - 16 kHz) (±10°)
- Vertical Coverage (Vertical Broad Mode)
- 45° (750 Hz - 16 kHz) (±10°)
- Vertical Coverage (Horizontal)
- 150° (500 Hz – 8 kHz, ±20°)
- Sensitivity (2.83V@ 1m) Narrow
- (speech mode) 98 dB (1 kHz - 8 kHz ) ; (music mode) 93 dB (300 Hz - 18 kHz)
- Sensitivity (2.83V@ 1m) Broad
- (speech mode) 96 dB (1 kHz - 8 kHz) ; (music mode) 92 dB (300 Hz - 18 kHz)
- Nominal Impedance
- 8 ohms
- Power Capacity
- 500 W (2000 W peak), 2 hrs ; 350 W (1400 W peak), 100 hrs
- Max SPL Narrow
- (speech mode) 125 dB cont ave (131 peak) ; (music mode) 120 dB cont ave (126 peak)
- Max SPL Broad
- (speech mode) 123 dB cont ave (129 peak) ; (music mode) 119 dB cont ave (125 peak)
- Low Frequency Drivers
- 4 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance, shielded.
- High Frequency Drivers
- 16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded.
- Outdoor Capability
- IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
- Insert Points
- 10 M6 swivel (pan)/tilt (16 mm deep) insert points on back panel.
- Mounting
- Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously variable +/-15 degree tilt, as well as 5 degree fixed increment points. Ten threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for OmniMount® 60.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
- Included Accessories
- Swivel (pan) / tilt wall bracket
- Optional Accessories
- MTC-PC2 terminal panel cover ; MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty speaker stand ; MTC-CBT-FM2 flush-mount low-profile wall-mount bracket