The K-9600 is, at its core, a twelve-channel audio distribution amp... but it can also do so many other things.
The K-9600 is a twelve-channel audio distribution amp that can be configured for six stereos 4 Ohm/8 Ohm zones (30W/channel @ 8 Ohms; 50W/channel @ 4 Ohms); but it can also be configured for six stereo 70/100V zones (30W/channel); or three high powered bridged zones (100W @ 8 Ohms). By the way, the K-9600can be configured for any combination of stereo 4 Ohms/8 Ohms, 8 Ohms bridged and 70/100V zones all at the same time!
And there’s more. Each zone can be controlled via IR or RS232 for ON/OFF, Input, Volume/Mute, Treble/Bass and Left/Right Balance. The RS232 section is bi-directional with an easy to configure command structure. The K-9600 can be configured to automatically send zone status updates or respond to queries to confirm zone status and settings. Commands for volume, treble/bass and balance can be specific values or step commands depending upon the control application.
The K-9600 has an Audio Bus IN that can be manually selected by IR commands, RS232 commands or voltage trigger. The voltage trigger will switch a zone to the Audio Bus IN as long as there is voltage present on the zone Line/Bus Trigger IN. When the voltage is cut, the zone automatically switches back to the zone Line IN. Great for momentary switching to an audio page on the Bus IN!
The K-9600 has a 110~120V/220~240V select switch allowing it to be used just about anywhere there is AC Voltage.
SKU: K9600
Categories: Amplifiers & Receivers, Amplifiers