Karbon Vision Accessories Screw Plug Adapter POE-Con02
Connect two male RJ45s to your switch, then remotely connect each male RJ45 to your camera,WIFI or phone. Use any CAT5e cable between the two devices. It provides a low cost solution for either use case.
UPoE operation is intended for use with PoE Switch devices. Ethernet doubler operation is intended for use with any 10/100 switch with our without PoE.
Save the Cables,Tubes cost. And Save the installation cost and Time. Use with a injector to doubie the power into one device from 30 watts to60 wattS- Combines two 802.3at /af ports into one uPOE port.
Supports gigabit data rates and 60 watts per CAT-6 cable. Use two for each UPOE device-one on the PoE side and one on the LAN side of a PoE Switch devices.
Use to put two 10/100 ethernet circuits onto one long run ethernet cable with or without PoE. supports 2 individual 10/100 data rate connections and uo to 30 watts for each(60watts total) on CAT5e.
SKU: POE-Con02
Categories: Accessories
Model Number
| POE-CON02
|
Power sources
| PoE switch or injetor
|
8 wires, 4 Pair split 10/100 Connector
| Female RJ45
|
4 wires, 2 Pair split 10/100 Connector
| male RJ45 with 1&2 and 3&6
|
Input voltage Max
| up to 57V
|
lnput Current at 48V
| 65Ma per pair-60 Watts total
|
Operating Temp
| 0 ℃ ~50 ℃
|
Size
| 125mm Cable Length
|