Key Digital HDMI Over CAT5e/6 HDBaseT Extender Transmitter and Receiver Kit KD-X222PO

Brand: Key Digital

$0.00

Product Overview:

The KD-X222PO HDBaseT HDMI Transmitter and Receiver Kit from Key Digital. This a high-performance range extension kit for transmitting UHD 4K/30 4:4:4 and UHD 4K/60 4:2:0 signals up to 150' using Key Digital's KD-CATSTP1X super CAT6A shielded cable, or up to 125' using a single third part CAT5e/6 cable. Equally 1080p/60, 3D signals can be extended up to 250' using Key Digital CAT6A cabling or up to 230' using a third party cable. In addition to carrying high-quality HDMI video and audio signals, the KD-X222PO carries IR or RS-232 for controlling remotely located equipment or the RS-232 port can be used to control the KD-X222PO. Also this unit kit supports HDR10 (High Dynamic Range) so users can experience more life-like images through a greater range of luminance levels. The KD-X222PO features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply.

The KD-X222PO Extender set is compatible with all HDMI and HDCP technologies up to HDCP 2.2 and HDMI technology such as 4K/UHD 4:2:0/8bit at 60f/s. Through Hot Plug Detection Control this extender enables the integrator to choose if active signal voltage is forced to connected input devices. Furthermore, the KD-X222PO EDID internal library features 15 default EDID configurations and native EDID data from output/display devices connected via Rx.

Additional features of the KD-X222PO include two channels of IR enable control to/from devices connected to the Tx and Rx units, with bi-directional control to and from the Tx and Rx unit on 3.5mm connector. There is support for standard 3D stereoscopic signal formats, and will support 12-bit Deep Color video / 8-bit color for 4K/UHD. With Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio, as supported formats of lossless compressed digital audio.

Key Features:

  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
  • 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit
  • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
  • 3D: Support for standard 3D stereoscopic signal formats
  • Low Profile: Super slim chassis design
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • CEC Support: For inter-device control between input and output HDMI channel
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.

 

 

 

 

 

(10 products available)
Quantity

SKU: KD-X222PO

Categories: A/V Distribution, Extenders & Baluns

Technical:
  •  Inputs Tx (Each): 1 HDMI, 1 IR In
  •  Outputs Tx (Each): 1 CAT5e/6 UTP/STP, 1 IR Out /RS-232 Bi-Directional
  •  Inputs Rx (Each): 1 CAT5e/6 UTP/STP, 1 IR In
  •  Outputs Rx (Each): 1 HDMI, 1 IR Out /RS-232 Bi-Directional
  •  DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
  •  HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
  •  HDMI Connector: Type A, 19 Pin Female
  •  RJ45 Connector: Shielded Link Connector, HDBaseT
  •  IR In Connector: Phoenix Connectors
  •  IR Out (RS-232) Connector: Phoenix Connectors
General
  •  Regulation: CE, RoHS, WEEE
  •  Enclosure: Black Metal
  •  Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs
  •  Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector
  •  Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor

0.00

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Submit Your Review

Please login to write review!

Upload photos
You can upload up to 6 photos, each photo maximum size is 2048 kilobytes

Related products