Lutron Connect Bridge with Power Supply CONNECT-BDG2-1
$0.00
PRODUCT OVERVIEW:
The Lutron Connect Bridge creates a link between a RadioRA 2 or HomeWorks QS system and the Lutron cloud, enabling remote access to your system.
KEY FEATURES:
- Works with the Lutron Connect app (Android® and iOS®)
- Provides remote access for control and monitoring of system via Lutron Connect app
- Timeclock syncing to always ensure accurate system time
- Compatible with Apple HomeKit technology for up to 99 zones
- Uses Siri voice control to adjust lights and shades
- Sonos® endorsed integration 3
- Integrates with Amazon® Alexa®-enabled devices
- Supports geofencing from the Lutron Connect App
SKU: CONNECT-BDG2-1
Categories: Smart Home, Controllers, Lighting & Control, Controllers & Base Station
- Power 5 V- 300 mA
- Power Supply (CONNECT-BDG2-1): 5 V- 550 mA; cable length 6 ft (1.83 m)
- Power Supply Kit (CONNECT-BDG2-3): 5 V- 1000 mA; cable length 6 ft (1.83 m)
- Consumption 3 W
- Test conditions: LED on, Ethernet cable plugged in, powered by the 5 V- power supply
- Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C),
- 0% to 90% non-condensing humidity. Indoor use only.
- Communications Internet connection is required for initial setup, to maintain system date/time, for remote access from the Lutron Connect app, and to receive periodic firmware updates.
- Network connection to RadioRA 2 main repeater or HomeWorks QS processor is required.
- Not a wireless device.
- Protection Tested to withstand electrostatic discharge without damage or memory loss in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation in accordance with IEEE C62.41-1991.
- Power Failure Power failure memory: should power be interrupted, the Lutron Connect Bridge will return to its previous state and reconnect to the Lutron system and cloud services when power is
- Connections Ethernet: 3 ft (0.92 m) cable included for internet and Lutron Connect Bridge connection.