Lutron Diva Smart Dimmer for Caseta - DVRF-6L-WH

Regulatory Approvals

• cULus Listed

• NOM Certified

• FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules

• Industry Canada Certified

• IFTEL Certified

• NEMA 410: PD (-5ANS, -6ANS, -5WS, -10NXD, -5NE), DVRF (-6L, -5NS)

Power

Operating voltage:

• 120 V~ 50/60 Hz: PD (-3PCL, -6WCL, -10NXD, -6ANS, -5ANS, -5NE, -FSQN), DVRF (-6L, -5NS, -AS)

• 120/277 V~ 50/60 Hz: -5WS-DV

Key Design Features

• Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.

• Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.

• Load controls always operate locally and do not require system control.

• Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.

• PD-5WS-DV, PD-5ANS, PD-6ANS, PD-10NXD, DVRF-5NS, and DVRF-6L use conventional 3-way wiring.

• DVRF-6L and DVRF-5NS can also be wired with an accessory switch, DVRF-AS.

• Uses Lutron Claro wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately.

• Lutron Claro wallplates snap on with no visible means of attachment.

• Requires a 1-gang U.S. wall box. 31⁄2 in (89 mm) depth recommended, 21⁄4 in (57 mm) depth minimum1.

• PD- models use green status LED(s) to indicate load status.

• DVRF-6L uses a white soft glow light bar and the

• DVRF-5NS uses a white status LED to indicate load status.

• PD-FSQN provides 4 quiet fan speeds plus OFF for a single ceiling fan.

• System Communications and Capacity

• Caséta switches, dimmers, and fan controls communicate with Pico remote controls, Caséta motion sensors, and the Lutron Smart Hub/Smart Hub PRO through Radio Frequency (RF).

• The Caséta switches, dimmers, and fan controls must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls of a Lutron Smart Hub, Smart Hub PRO, or Caséta Repeater.

• The Caséta switches, dimmers, and fan controls must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls of Pico remote controls or Caséta motion sensors (with no Smart Hub installed).

• Device limits

• Pico remote controls and Caséta motion sensors: up to 10 devices (total) may be paired to each Caséta switch/dimmer (with no Smart Hub installed).

• Smart Hub or Smart Hub PRO system: up to 75 total wireless devices (Caséta dimmers/switches, Pico remote controls, Caséta motion sensors, and shades) are supported per system. Smart Hub or Smart Hub PRO counts as one device. The Caséta repeater counts as one device.

• Environment

• Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%to 90% humidity, non-condensing. Indoor use only.

• PD-5WS-DV, PD-5ANS, PD-6ANS, PD-10NXD, DVRF-5NS, and DVRF-6L can be used with a mechanical switch in 3-way applications.