Xantech Universal Micro Link Standard Range Kit ML85K
$0.00
PRODUCT OVERVIEW:
The ML85K has a peephole-style design and a standard range (up to 80 feet). It works with LED, LCD & plasma TV’s and CFL lighting. For use with all types of cable boxes, satellite boxes, remote controls and TVs. White, black,& brass bezels included to match décor.
KEY FEATURES:
- Small size, mounts in 1/2" diameter hole. 2 inches deep (50mm).
- Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-in to Xantech Connecting Blocks.
- Works in normal 3-wire mode (12VDC, IR, GND).
- Green Talkback LED for System Verification.
- Includes 789-44 Connecting Block, Power supply, and four 283D emitters for easy system installation.
Kit includes:
- 1 ML85 IR receiver
- 1 Model 789-44 connecting block that connects one IR receiver to four IR emitter ports. It has enough power to drive up to four dual emitters
- 1 12VDC regulated power supply
- 4 Blink-IR™ Designer emitters
- 1 Instruction manual
- 1 Trim kit with white, black, and brass bezels
- Works with all types of cable boxes, satellite boxes, remotes and TVs
- Peephole design—easy to hide
- Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents
- IR modulation frequency bandwidth: 25-60kHz
- Reception range: up to 80 ft/24 m*
- Color-coded connectors for fast, easy installation
* Actual range depends on remote control output and ambient lighting conditions.
SKU: ML85K
Categories: Lighting & Control, Infrared
- Infrared modulation frequency bandwidth: 30 - 60 kHz.
- IR reception range: Up to 80 feet, depending on remote control output strength and ambient conditions.
- Reception angle: 55 degrees off axis for 50% range reduction.
- Cable requirements: 3-conductor. Use 24 gauge up to 200', 22 gauge up to 600' 20 gauge up to 2000', 18 gauge up to 5000' - unshielded OK.
- Max. transmission length: 1 mile using 18 gauge wire.
- Maximum current output: 100mA
- Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
- Dimensions: 1/2" diameter x 2" deep (13mm x 50mm).
- Power requirements: +12VDC, 20mA.