Monitor Audio Amplifier IA150-8C
$0.00
Product Overview:
The IA150-8C enables up to eight (4 stereo pairs) channels of 150 watts of power at 4 ohms. It’ll fit 1U rack height and, it employs our Connect IP interface, a web application, which can be accessed by any device connected to the internet with a browser on the same network. Important: Click here to install the latest IA150-8C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area. The Monitor Audio Installation Amplifiers are configurable to 1, 2, 3, 4, 5, 6, or 12 channels. The IA150-8C enables up to eight (four stereo pairs) channels of 150 watts of power at four ohms. It’ll fit 1U rack height and, as a member of the Monitor Audio ‘Connect’ division, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. Perfectly prepared for any project, the IA150-8C’s industry standard removable block connectors accept up to 12-gauge (3.5 mm2) cable. Together with the rest of the Installation Amplifier range, the IA150-8C provides the brain as well as the brawn for the mightiest of projects.
Key Features:
- Frequency Response: 5 Hz – 50 kHz
- T.H.D. Total Harmonic Distortion: 0.03%
- Dimensions: 52.8 x 438 x 427 mm
- Rackheigth: 1 U
- Weight: 7.45 kg
- Power (RMS): 8 ohms / 140 W
SKU: IA150-8C
Categories: Amplifiers & Receivers, Amplifiers
Specifications:
- 'Connect' IP Control: Yes
- Channel Number: 8 (4 Stereo Pairs)
- Power (W / Channel) | 4 ohms: 150 W
- Power (W / Channel) | 8 ohms: 140 W
- Power (W / Channel) | Bridge (8 ohms): 300 W (4CH)
- Power (W / Channel) | 70V: N/A
- Input Impedance: 20 K ohms
- Output Impedance (Loop RCA): 600 ohms
- Input Sensitivity: 100 mV / 1 W, 1140 mV – Full power
- Maximum Input Voltage: 2.9 V
- Signal to Noise (SN:R): -100 dB (20 Hz – 20 kHz)
- Frequency Response: 5 Hz – 50 kHz
- Total Harmonic Distortion THD + N@1 KHz: 0.03%
- Rack Height: 1U
- Dimensions (Excluding Feet (H x W x D)): 42.4 x 438 x 427 mm
- Dimensions (Including Feet (H x W x D)): 52.8 x 438 x 427 mm
- Width (including rack brackets):482 mm (19")
- IP Communication:TCP/IP (RJ-45 10/100 Base T)
- Mains Operating Voltage: 100 –120 V @ 60 Hz. 220 – 240 V @ 50 Hz
- Fuse Rating: 10 A (T10AL ~ 250VAC)
- Standby Power Consumption: <0.5 W (green mode)
- Networked Standby Power Consumption: <2 W
- Weight: 7.45 kg (16 lb 6 oz)
- Sold As: Single Unit