Monitor Audio Amplifier IA200-2C
$0.00
Product Overview:
The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. A ‘Connect’ amplifier, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.
Important: Click here to install the latest IA200-2C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.
The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.
A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.
Key Features:
- 200 x2 @ 4Ohms via Hypex Amplifier modules
- 1U Chasis
- Full IP Control
- Fully customizble acousitic settings
SKU: IA200-2C
Categories: Amplifiers & Receivers, Amplifiers
Specifications:
- 'Connect' IP Control Yes
- Channel Number 2 (1 Stereo Pair)
- Power (W / Channel) | 4 Ohms 200 W
- Power (W / Channel) | 8 Ohms 150 W
- Power (W / Channel) | Bridge (8 Ohms) 470 W (1 ch)
- Power (W / Channel) | 70 V N/A
- Input Impedance 20 K Ohms
- Output Impedance (Loop RCA) 600 Ohms
- Input Sensitivity 100 mV / 1 W, 1230 mV – Full Power
- Maximum Input Voltage 2.9 V
- Signal to Noise (SN:R) -100 dB (20 Hz – 20 kHz)
- Frequency Response 5 Hz – 50 kHz
- Total Harmonic Distortion THD+N @ 1 kHz 0.03%
- Rack Height 1U
- Dimensions (Excluding Feet (H x W x D)) 42.4 x 438 x 427 mm (1 11/16 x 17 1/4 x 16 13/16")
- Dimensions (Including Feet (H x W x D)) 52.8 x 438 x 427 mm (2 1/16 x 17 1/4 x 16 13/16")
- Width (Including Rack Brackets) 482 mm (19")
- IP Communication TCP/IP (RJ-45 10/100 BaseT)
- Mains Operating Voltage 100 – 120 V @ 60 Hz / 220 – 240 V @ 50 Hz
- Fuse Type 5 A (T5AL ~ 250 VAC)
- Standby Power Consumption <0.5 W (Green Mode)
- Networked Standby Power Consumption <2 W
- Weight 5.3 kg (11 lb 10 oz)
- Sold As Single Unit