Monitor Audio In-Wall Speaker W150-LCR
$0.00
PRODUCT OVERVIEW:
Monitor Audio W150-LCR In Wall Speaker. The 2-way W150-LCR in-wall model with 5-inch drivers features Monitor Audio's MMP II cones coupled with a pivoting version of our C-CAM Gold Dome tweeter. These in-wall models can be used vertically or horizontally: the ideal aspect for centre-channel applications in discreet home theatre systems.
Want crystal-clear center channel sound without taking up any shelf space? Then check out Monitor Audio's W150-LCR in-wall speaker. It delivers accurate, dynamic sound that's great for movie soundtracks and music alike.
This multi-talented speaker can also be used as a left- or right-channel speaker. The drivers are specially configured to provide optimal performance whether you mount the speaker vertically or horizontally.
Mount the W150-LCR horizontally as an in-wall center-channel speaker, or vertically as a left- or right-channel surround speaker.
This speaker's 1" dome tweeter is made from Monitor's high-tech ceramic-coated aluminum/magnesium alloy. This exceptionally stiff, lightweight material allows the driver to respond swiftly and precisely to the audio signal for greater accuracy.
The tweeter also gets an anodized coating of gold that ensures smooth, extended highs. It also pivots, so you can aim it toward your preferred listening spot for more direct sound. Solid, accurate mids and bass come courtesy of dual 5" woofers.
If this is a do-it-yourself install, check out my guide to installing in-ceiling speakers, along with our selection of in-wall speaker wire. You can paint the included magnetic grille to have your speaker blend in with your décor.
Key Features:
- ideal for use as a center-, left-, or right-channel home theater speaker, or in a high-performance stereo system
- can be mounted vertically or horizontally
- 1" pivoting gold dome tweeter for detailed sound and extended high-frequency response
- tweeter uses ultra-rigid, lightweight C-CAM® (Ceramic-Coated Aluminum/Magnesium alloy) cone material to provide high efficiency and low distortion
- dual 5" MMP® II (Metal Matrix Polymer) bass drivers
- frequency response: 60-30,000 Hz
- recommended amplifier power: 30-100 watts
- sensitivity: 88 dB
- impedance: 8 ohms
- patented Tri-Grip® mounting system ensures maximum surface seal for better bass and midrange clarity
- paintable bezel and removable magnetic steel grille
- overall dimensions (including grille): 7-1/16" x 15-3/16"
- cutout dimensions: 5-3/4" x 13-7/8"
- mounting depth: 4"
SKU: W150-LCR
Categories: Sound System, In-Wall
- Frequency Response
- 50 Hz – 60 kHz (-6 dB typical in room response)
- Nominal Impedance
- 6 ohms
- Sensitivity (1W@1M)
- 89 dB
- Maximum SPL
- 8 dBA
- Power Handling (RMS)
- 150 W
- Recommended Amplifier Requirements
- 60 – 150 W
- Crossover Frequency
- F - 500 Hz @ 12 dB/Octave M.F -500 Hz @ 12 dB/Octave. 3 kHz @ 18 dB/Octave H.F - 3 kHz @ 18 dB/Octave
- Drive Unit Complement
- 2 x 6.5” C-CAM Bass drivers with RST cone technology
- 2 x 4” C-CAM Mid-range drivers with RST cone technology
- 1 x C-CAM H.F ribbon transducer
- Adjustment Controls
- Boundary Compensation (On/Off)
- MF Level: +1/0/-1 (dB)
- HF Level: +1/0/-1 (dB)
- Overall Dimensions (H x W x D)
- 907 x 257 mm (353/4 x 101/8")
- Overall Depth (Including Grille)
- 102 mm (4")
- Cut-Out Dimensions
- 880 x 230 mm (3421/32 x 9")
- Mounting Depth
- 96 mm (33/4")
- Fixing Type
- 10 x Tri-Grip Dog leg fixings
- Construction Material
- Cast Polymer enclosure with die-cast Aluminium baffle (RoHS2 Compliant)
- Weight
- 98 kg (28 lb 6 oz)
- Pre-Construction Bracket
- WB12 Pre-Construction Bracket (Green)
- Sold As
- Single Unit
- Frequency Response
- 60 Hz – 30 kHz
- Nominal Impedance
- 8 ohms
- Sensitivity (1W@1M)
- 88 dB
- Maximum SPL
- 108 dBA
- Power Handling (RMS)
- 100 W
- Recommended Amplifier Requirements
- 30 – 100 W
- Drive Unit Complement
- 2 x 5" MMP IIcone bass driver
- 1 x 1" (25 mm) C-CAMpivoting Gold Dome tweeter
- Adjustment Controls
- N/A
- Overall Dimensions (Including Grille (H x W x D))
- 4 x 385.2 mm (7 x 153/16")
- Overall Depth (Including Grille)
- 105 mm (41/8")
- Mounting Depth
- 2 mm (315/16")
- Cut-Out Dimensions
- 145 x 353 mm (53/4" x 137/8") Required Clearance for Doglegs in Centre Configuration 400 x 197mm (153/4" x 73/4")
- Fixing Type
- Tri-Grip dog fixings
- Construction Material
- Mineral-filled ABS, RoHS compliant
- Weight
- 76 kg (8.3 lb)
- Pre-Construction Bracket
- WB5LCR Pre-Construction Bracket (Yellow)
- Sold As
- Single Unit