NAPCO StarLink Connect-DL Universal Cell/IP Communicator SLE-LTEA-CB

Specifications

StarLink Connect Specifications: • Housing: Durable ABS plastic (white) includes three keyhole slots for mounting (easy alignment with triple gang boxes) • Dimensions: 5-3/8” x 7-7/8” x 1-7/8” (HxWxD) • Diagnostic LED Indicators: Three (3): Green, Signal Strength; Amber- Buxsy/ Activation; Red-Trouble All models powered by the control panel - Electrical Ratings for +12V: • Input Voltage: 11-15VDC (power-limited output from control panel) Input Current: • Standby Current: 100mA (110mA with telco EOLR) Electrical Ratings for the IN 1 Burg/Fire Input: • Input Voltage: 9-15VDC • Maximum Input Current: Up to 2mA from control panel supply circuit Ratings for IN 2 and IN 3: • Maximum Loop Voltage: 15VDC • Maximum Loop Current: 1.2mA • End of Line Resistor (EOLR) Value: 10K Electrical Ratings for 3 PGM Outputs: • Open Collector Outputs: 3V Max., active; 15V Max., inactive • PGM Sink Current: 50mA, Max Optional Accessories: • SLE-WIFI-MODULE Optional plug-in module for connection to the Internet† via a wireless (Wi-Fi) link, eliminating a wired Ethernet cable (for use w/ any StarLink Model) • SLE-ANTEXT75 Optional extended antenna with 75’ premium low-loss cable and full mounting hardware. Supports all top brand radios, provides dramatic signal improvement (indoor/outdoor). SLE-ANTEXT50 As above, with 50’ cable SLE-ANTEXT30 As above, with 30’ cable (For More on optional StarLink Omni X Universal Cellular Extended Range Antenna - See Spec Sheet A745 &/or consult WI2193.)