Qolsys S-Line 16-Hardwired Zones Translator (w/Large Enclosure) QS7134-840
$0.00
Product Overview:
The Qolsys QS7134-840 (aka IQ Hardwire 16-F) is a S-Line translator with a large enclosure that allows you to encrypt and connect up to 16 hardwired zones wirelessly to any S-Line compatible Qolsys IQ control panel. The QS7134-840 is a cost-effective way of integrating hardwired security and smoke detector zones with the compatible IQ panel.
It includes backup battery charging, 500mA of 12-volt auxiliary power, an onboard siren relay, built-in status LEDs for each zone, and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.
Key Features:
- Large plastic enclosure with ample wiring room, backup battery holder, and an expansion slot for second module
- Encrypted S-Line sensor technology protects signals sent to the compatible panel (while still providing support for legacy 319.5 systems)
- Supports up to ten two wire smoke detectors
- LED lighted zones for ease of "learn-in" installation/troubleshooting
- EOL supervision using 4.7K Ohm resistors (included) or 1k-10k Ohm depending on Resistor Mode
- Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
- Charging circuit for back-up battery, fully supervised with power outage recovery
SKU: QS7134-840
Categories: Structured Wiring, Enclosures
- Dimensions: 16" X 14" X 3"
- Backup batteries: 12VDC 5AH Max (not included)
- Input voltage: 16.0VDC Plug-In Transformer
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Humidity: 95&per; RH Max
- EOL Supervision: 4.7K Ohm fixed or 1k-10k Ohm depending on Resistor Mode
- Input Zones: 15 N/O or N/C
- Smoke Zone: 1 two-wire smoke loop, 10 detectors max. Support for System Sensor® 2W-B, 2WT-B, 2WTA-B*
- Auxiliary Voltage Output: 12VDC @ 500mA Max
- Tamper Zone: Used for case tamper, no resistor
- Relay Contact: 60VDC/1A Max drives siren or other device