WyreStorm 4K HDR 4:4:4 60HZ HDBASET EXTENDER EX-100-H2-PRO
$0.00
Product Overview:
Utilizing the best in HDBaseT technology, the EX-100-H2-PRO uses the powerful 2.0 chipset for 5-Play functionality: 4K HDMI, USB, Ethernet, Control and Power over 100m/328ft of Cat 6 cable. Using DSC (display stream compression) the EX-100-H2-PRO can support HDMI video up to 2160p 4:4:4 at 60Hz (18Gbps) without any visual loss in quality or latency. With HID’s and data transfer in mind, the EX-100-H2-PRO supports USB 2.0 devices at up to 480Mbps, catering for powerful webcams, smart whiteboards and flash drives alike. Also included is a dedicated 2-way audio lane for transmission of analog stereo audio signals from TX-RX and RX-TX.
Key Features:
• Point-to-point HDBaseT Extender supporting:
- Content up to 4K/60 4:4:4 & RGB 8-bit
- The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
- HDCP 2.2 encryption technology ensuring compatibility with the latest 4K UHD content and sources
- HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
• Extends 2160p 4:4:4 or 4:2:2 12-bit HDR content from a source to a display or projector using HDBaseT up to 100m/328ft
• Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
• HDMI Input and HDMI output supports bandwidths of up to 18Gbps
• Compatible with DVI-I and DP++ v1.3 signals from compatible devices
• Bidirectional USB 2.0 passthrough offering 480Mbps transfer and HID extension, with host and 4 device ports on both TX and RX
• 10/100 Ethernet port on both ends for extension of LAN to TX or RX
• Bidirectional audio lane separate to HDMI signal sends and receives analog audio signals at either end
• Bidirectional IR, RS-232 and CEC communication
• DIP Switch selection for direction of USB control, long cable mode and firmware update
• Backwards compatible with HDBaseT™ 1.0 transmission and receiving devices (lowest denominator takes priority)
• LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
• 2-way PoH (Power over HDBaseT™) enables either transmitter or receiver to be remotely powered by the other unit
• Locking DC power jacks
• 12v DC PSU with US, UK, EU & AU Power cables included
• Mounting brackets included
SKU: EX-100-H2-PRO
Categories: A/V Distribution, Extenders & Baluns
- Inputs 1x HDMI In: 19-pin type A 1x Audio In: 3.5mm (1/8in) TRS Stereo; 1x HDBT In: 8-pin RJ-45 Female 1x Audio In: 3.5mm (1/8in) TRS Stereo
- Outputs 1x HDBT Out: 8-pin RJ-45 Female 1x Audio Out: 3.5mm (1/8in) TRS Stereo; 1x HDMI Out: 19-pin type A 1x Audio Out: 3.5mm (1/8in) TRS Stereo
- Output Video Encoding HDBaseT Class C
- Encoding Data Rate 10.2Gbps
- End to End Latency 10μs (micro seconds)
- Audio Formats 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
- Video Resolutions (Max) 1920x1080p @120Hz 12bit 70m/230ft 70m/230ft 100m/328ft; 1920x1080p @60Hz 12bit 15m/49ft 100m/328ft 100m/328ft; 3840x2160p @24Hz 10bit 4:2:0 HDR 15m/49ft 100m/328ft 100m/328ft; 3840x2160p @60Hz 8bit 4:4:4 7m/23ft 70m/230ft 100m/328ft; 3840x2160p @60Hz 10bit 4:2:0 HDR 5m/16ft 70m/230ft 100m/328ft; 3840x2160p @60Hz 12bit 4:2:2 HDR 5m/16ft 70m/230ft 100m/328ft
- Supported Standards DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
- Maximum Pixel Clock 600MHz
- HDMI HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
- Fiber Multimode HDMI | HDCP 2.2 | EDID
- IR 1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono | Bidirectional over OM3
- RS-232 1x RS-232: 3-pin Phoenix | Bidirectional over OM3
- USB 1x Type B (host) | 4x Type A (device) (Transmitter and Receiver), USB direction must be set using switch on both transmitter and receiver, USB hub compatible | Maximum: 7 devices, 23 endpoints, Maximum uplink speed: 190Mbps
- Power Supply 12V DC 3A
- Max Power Consumption 8.88W
- Operating Temperature 32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
- Storage Temperature -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
- Maximum BTU 30.30 BTU/hr
- Rack Units | Wall Box <1U
- Height With | Without Feet 21mm/0.83in
- Width With | Without Brackets 195mm/7.68in
- Depth With | Without Handles 94.8mm/3.74in
- Weight 0.36kg/0.79lbs
- Safety and Emission CE | FCC | RoHS