ZIG-IPPRO-TX has an HDMI input for connecting to video sources such as BlueRay or Cable Set Top Boxes. The ZIG-IPPRO-RX has an HDMI output for connecting to display devices such as TVs or Projectors. Both HDMI 2.0B ports support HDCP 1.4, 2.2, or 2.3. Zigen recommends the use of the included IR Receiver and IR Emitter. Using third party devices may not be compatible with the ZIG-IPPRO RX/TX. The IR Input Plug can be connected to an IR Receiver (3-pin Jack). The IR Input can also be connected to an output of a 3rd party Control System (2-pin Jack). The USB port of the ZIG-IPPRO-RX serves as the Remote Extender (REX) port which contains a hub with dual USB type-A connectors. These connectors are usually connected to USB client devices such as keyboards, mice, or flash drives. The 10GBase-T copper connections for ZIP-IPPRO RX/TX are POE compliant (30W IEEE802.3at Type 2 PoE+). Using POE eliminates the need of using an external Power Supply. IP Logic devices are SDVOE and/or AES67 compliant devices. Internet Protocol (IP) is the transmission medium for extending Audio, Video, and miscellaneous control signals such as serial RS-232, USB, and IR. ZIG-IPPRO RX/TX requires an Essentials control server and managed 10GbE network switches for routing. Zigen Corporation is a partner with Netgear to provide complete networking solutions. Contact Zigen for a list of alternate network switch manufacturers. Follow the diagram below for a typical IP Logic system connection.
SKU: ZIG-IPPRO RX
Categories: A/V Distribution, Extenders & Baluns