Zigen HDMI & VGA Auto Switching Wallplate ZIG-POEWP-100TX
$0.00
Product Overview:
ZIG-POEWP-100TX – HDMI/VGA Auto-switching wall plate, HDBaseT transmitter over single CAT5e/6 cable up to 100 meters. ZIG-POEWP-100TX can be used stand-alone as an HDBaseT wall-plate transmitter, but really shines when paired with the ZIG-RXAV-100 receiver & audio amplifier. A perfect “no-control” control system using “on-connection” technology to fire up projectors, drop screens and control lighting in small rooms.
Key Features:
- ULTRA HD 4K Certified HDBaseT Extender
- Auto-switching wall-plate.
- HDMI and VGA w/Audio inputs – VGA can be configured as Component, Y/C or C.
- HDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
- HDCP 1.4 / 2.2 /2.3
- Autonomous EDID management
- Supports HDR
- Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
- Supports CEC pass-through
- RJ-45 ports support HDBaseT up to 330-feet / 100-meter for 1080p
- RJ-45 ports support HDBaseT up to 230-feet / 70-meter for 4K
- 48V IEEE POE – remote or source
- ZigNet setup and control – or control from ZIG-RXAV-100 hand-held remote simple automation or integrate into 3rd party controller.
- The wall plate auto switching is based on sensing the +5V signal from the HDMI source or from the VGA source. This is the activity signaling pin.
SKU: ZIG-POEWP-100
Categories: Structured Wiring, Wall Plates
- HDMI x 1
- VGA x 1 - multi-port - supports YPbPr and Composite video
- 3.5mm Audio port - follows VGA port
- Power - On back - 5VDC direct or IEEE POE from RX or switch
- HDBasetT x 1 - RJ45 - note port is dual use so it can be used as an Ethernet port when programming or controlling the device.
- Distance between TX and RX: Full HDBaseT - 328' or 100M @ 2160P60 4:2:0 8-bit
- HDCP - Yes - 1.4 & 2.2
- 10.2 Gbps
- Video Timings: 480i, 480p, 720p, 1080i, 1080p, 1920x1200, 2K and 4K. 4K/2K, 30Hz 24bpp.
- 4K/2K, 60Hz, 24bpp with 4:2:0 pixel format
- Up to Dolby TrueHD and DTS Master Audio
- Yes - 2 gang Decora style